Faq

A: how about the uneven coating?

1.The nail brush. It is difficult to apply even, beautiful nails, without a handy brush. When selecting a brush, choose a brush with a clean head and a flat brush. This kind of brush will be easier to brush. 

2.Brush two times. It's usually done by applying two nail polish. The first time is all over. Don't rub it over and over again. Apply it gently. The second time you will do the first time, you will begin to apply. Because you're going to do it twice, you don't have to do it again and again.3

3.The order of the daub. It starts with the middle part of the nail and spreads to the fingertips. Then apply one side to each side, and the left middle right is divided into three parts. When you apply it, you need to measure up to three parts.

4.The tip of your nails. As you all know, nail polish in the tip of your nail is a lot easier to get rid of. When you apply it, you can apply it first to a thin layer on the tip. Then you start to paint your entire fingernails. This way the tip of your nails won't fall off the color.

5.Nail maintenance. Applying the tips of your fingers is bad for your nails. You can properly apply the nail maintenance oil, which is a good way to prevent pigmentation. Apply the oil, and you can apply it before your nail polish. It can also be applied without nail polish.

6.Nail polish. When choosing, try to choose the nail polish products that are full of color and it is damage to the nails. Good quality nail polish will not be easy to lose color and will keep the colors like the first time.

Why does a gel have bubbles?

1. There are too many things to go back and forth when applying nail polish, so we need to paint one way at the top.

2. The product that you use may have a problem in production, and it is recommended that buy a reputable brand to avoid a similar situation.

What is the reason for the wrinkling?

1. The paint is too thick.

2. This usually can only take the polish on the surface of the glue dry, and the underlying glue is not completely dry, so after apply polish are thin coated with a layer of glue, afraid of color is not real friends can color many times!

3. Pull your hand out of the light in the light time

4. the light old lamp will also cause wrinkles. The lamp is aged.The lamp has been used for a long time, the function will weaken gradually. The power of the lamp is not enough to cause wrinkling, and it is recommended that the lamp tube be replaced regularly to avoid the occurrence of the situation.

What is the reason for the particle?

1. The nail bed are not cleaned, so use the alcohol to scrub the nail clean after each polishing.

2. The small particles on the top of the bottle were taken down by the brush. It is recommended that make sure the nail bed is clean and clean the cap regularly to avoid similar situations.

3. The use of products in production is a problem, and it is also recommended that buy a reputable brand to avoid a similar situation.

Why is my gel easy to move?

1. Daily wear and nail problems.Nails in our daily life is vulnerable to wear and tear, excessive wear can make the nail glue is easy to fall if it is their own fingernails thin soft is more easily fell, so pay attention to good daily to protect nails.There's a problem with your own approach.

2. Always do a good job of wrapping your nails every time you do your nails, and prevent the nail oil from falling.

3. You should use the same brand.

It is more reliable to use the same line of products as the same brand. Without fully understanding the features of the product, the mix of products from different brands is likely to have undesirable consequences.

Why is your nails yellow?

 The main reason for the yellowing of crystal nails is exposure to ultraviolet light. Most liquid crystal shell, crystal shell powder is not contain the yellow factor, after the completion of the production need coated UV light oil, light oil, if the coating is fast dry a week later, the crystal nails will appear slightly yellow.

Why nail break off easily?

1,Usually because the structure of the crystal nail is not mastered, the radians from the point to the tip of the finger are not sculpted and the nails are

2,Apply too thin

3,Polluted or deteriorated products cause the problem.

4,Make acrylic nail too long.

5,Real nail too long and too thick.

6,Wrong apply way.

7,Polish nail surface too much.

8,Do nail art and remove nail art frequently make nail damage.

What cause acrylic liquid crystallization?

Under low temperature, acrylic liquid may be crystallized at the 8℃.It's normal,just to improve room temperature or put acrylic liquid in warm water.

What’s cause the warping of acrylic nail?

1,Not polish and clean enough nail surface

2,Not apply two times desiccant

3,Non-acidic desiccant is not used in conjunction with nail prep

4,Apply acrylic powder to the cuticle

5,Not control the rate of acrylic powder and liquid well

6,Not apply acrylic powder well

8,Not arrange maintain in time.

9,Products are polluted or deteriorated

10,Products quality not good

11,The customer's nails are thin

12,The acrylic nail lasts too long,turn yellowing and crisp.Usually remove it after 2-3 months.

What’s cause gel polish change color?

1,Apply too much topcoat

Apply too much topcoat may change the color.Actually,all brand gel polish change color of different levels.If you find the color change a lot,it may be the quality problem,change a better one.

2,Too long time under lamp.

Less than 2 minutes under lamp or may cause the gel turn yellowing.

3,Affect of fluorescer

 Some brands add fluorescer to make topcoat more transparent.It may cause gel polsu change color.And too much fluorescer is bad for your health.

What’s cause the problem of gel shrink？

1,Nail surface is not clean.

Not clean nail surface carefully or touch nail surface after cleaning.

2,Grease from external contact

Grease from external contact cause gel shrink easily.For instance,while customers eating greasy food when they do nail art,the grease may touch nail surface.

3,Product quality problem.

If you find gel shrink,your gel polish may not good.You’d better buy a better one.Too smooth nail surface can also cause gel shrink

4,Short time under lamp or the lamp is perishing.

5. Apply too much topcoat.

Why does gel polish not dry under lamp?

1,Apply too much base gel,just apply thin base gel. (right amount: 0.1 ml for all nails)

2,No enough UV light or the lamp is perishing.The correct way: check the lamp,exchange a good one.

3,Too short time under lamp.The correct way:keep your nail under lamp at least 60s-120s each time.

4,The Angle of the nail is not exactly in the right direction. The correct way: put your hand on the right level when curing, and put your thumb under lamp separately.

Why does gel polish crack?

The topcoat usually cracks 1-2 days later after nail art finished.If not properly handled,all the topcoat will be come off.

1,Apply topcoat too thin.Thinner layer is not strong enough, come off easliy.

2,Use no wipe topcoat. No wipe topcoat is inelastic but gel polish is inelastic.Inelastic gel polish

3,Real nail too thin.The correct way: apply clear gel after base gel to make nail stronger.

The reason why topcoat not shiny?

1,Use a wrong way when cleaning nail surface.The correct way: Use a cotton with cleanser plus for each nail,do not rub the surface back and forth.

2,Two times topcoat. 2 minutes under UV lamp after applying the 1st time topcoat.Then 4-6 minutes under UV lamp after applying 2nd time topcoat.

3,The correct way: Two times thin topcoat.Wait for 20s after curing,then clean the surface if using a wipe topcoat.

4,The color gel is not smooth enough,leaving brush marks make the surface not shiny.

5,Use a wrong topcoat. Should choose the same brand as color gel.

6,Do not use cleanser liquid that contains acetone.Use a professional cleanser plus.

7,Apply topcoat too thin.